Wooden beer mug

Step 1: Cutting the wood

For this mug i used some pallet wood i had laying around.

You will need 15 sticks cut at a length of 22 cm and at an angle of 12 degrees.

Step 2: Tape it

Put the sticks around something round and tape them together ,but leave one opening.

Step 3: Glueing

Now take the whole thing and put it on a flat surface and put some glue between the sticks .

Step 4: Tourniqueting

Now fold it together again.

I used some rope and a pair of screwdrivers to tighten the sticks together.

Now you can let the glue dry.

Step 5: The ear

Now you can make the ear.

Mine is approx. 20cm x 8cm.

I did all the sanding with an angle grinder.

When the glue of the mug has dried ,you can also sand this.

Step 6: Decorings

To make it  look better i've put some rings out of sheetmetal around them.

Best is to screw these behind the handle  into one piece of wood.

You could also use some rope to put around the mug.

With the angle grinder i made some grooves and glued the rings in.

Step 7: Putting it together

Now put the ear on it ,

I made the mistake to put the bottom in before screwing the ear on from the inside.

Next glue the bottom in and do some more sanding